IPTV/check_channels.py

#!/usr/bin/python3
"""Report which channels in `lists/` are no longer reachable.

The playlist checker records the URLs it could not open, but a bare URL does not say
which channel or which list it came from, and one failed attempt does not mean a
channel is gone. Streams time out, rate limit, move between CDNs, and some are only
served inside their own country.

This script maps every URL back to its channel and list, probes each one several
times, and separates the cases that look alike from the outside:

  dead         every attempt said "not found", so the stream is really gone
  disputed     looked dead over HTTP, but ffprobe found a real audio/video stream
               behind it - needs a human, not a bot, to decide
  blocked      the server answered but refused us, which is what a channel served
               only in its own country looks like from anywhere else
  unreachable  every attempt timed out or failed to connect
  flaky        answered at least once, so it is up but unreliable from here
  alive        answered every time

Only `dead` is safe to act on without a second opinion. `blocked` in particular must
not be treated as a fault: the lists mark geo-blocked channels deliberately.

Both playlist formats used by the lists are understood, HLS (.m3u8) and MPEG-DASH
(.mpd), so a DASH stream is not mistaken for a broken one. Neither check is airtight
on its own: a manifest that starts with `#EXTM3U`/`<MPD` is not proof the media
behind it plays, and a payload ffprobe can decode is not proof it is a live channel
rather than a stray media fragment sitting at a familiar-looking URL - one such
fragment is what first prompted the --confirm-dead option below. Treat `dead` as
"nothing here answered like a stream, twice, two different ways" rather than proof.

With --confirm-dead, every channel that looks `dead` over HTTP gets a second,
independent opinion from `ffprobe` (part of ffmpeg) before being reported as dead:
ffprobe actually tries to decode audio/video from the URL, which catches streams a
header check alone cannot judge either way. This second opinion is one-directional -
it can only pull a channel *out* of `dead` into `disputed`, never push a channel that
looks fine over HTTP into a worse state - because a slow or unusual server can make
ffprobe time out on a channel that plays fine elsewhere (this happened while writing
this script: a known-good DASH channel needed longer than any reasonable per-channel
budget for ffprobe to open), and a timeout there must not be read as confirmation of
anything. It is off by default because it materially changes the runtime: ffprobe
does real network I/O per candidate, on top of the HTTP probes already spent finding
that candidate, and only makes sense where that time is available (a weekly run),
not where it is not (a PR check blocking on a handful of changed links).

By default this only probes the `[>]` rows - the channels currently listed as working.
A row already marked `[x]` (Invalid) is never looked at again once it is marked, so a
source that comes back online stays listed as dead forever. --invalid flips that
around: it probes only the `[x]` rows, and anything that now answers `alive` or
`flaky` is printed as a recovery candidate instead of being judged dead/unreachable -
which is the expected, uninteresting outcome for a row that is supposed to be broken.
--include-invalid runs both passes together, in one pool of workers, so a dashboard or
history file sees the whole list rather than just the working half of it. The exit
code only ever reflects dead `[>]` channels - a dead `[x]` channel is not a
regression, it is the status quo - so --invalid on its own always exits 0.

Usage:
    ./check_channels.py                          # every list, working channels only
    ./check_channels.py greece italy             # only those lists
    ./check_channels.py --attempts 5 greece      # more attempts per channel
    ./check_channels.py --confirm-dead greece    # + ffprobe second opinion on dead ones
    ./check_channels.py --invalid greece         # only the channels already flagged Invalid
    ./check_channels.py --include-invalid        # working channels + Invalid ones, one run
"""

import argparse
import http.client
import json
import os
import re
import shutil
import ssl
import subprocess
import sys
import time
import urllib.error
import urllib.request
from collections import namedtuple
from concurrent.futures import ThreadPoolExecutor
from datetime import datetime, timezone

LISTS_DIR = os.path.join(os.path.dirname(os.path.abspath(__file__)), "lists")

# one bundle for the knobs every probe/list/run function otherwise had to repeat
ProbeSettings = namedtuple(
    "ProbeSettings", ["attempts", "timeout", "pause", "workers", "confirm_dead"],
)

# `| 1 | Channel name | [>](url) | ...` (working) or `| 1 | Channel name | [x](url) | ...`
# (flagged Invalid) is the row format used by every list
ROW = re.compile(r"^\|[^|]*\|([^|]+)\|[^|]*\[([>x])\]\((https?://[^)\s]+)\)")

USER_AGENT = (
    "Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 "
    "(KHTML, like Gecko) Chrome/131.0 Safari/537.36"
)

OK = "ok"
GONE = "gone"
REFUSED = "refused"
UNREACHABLE = "unreachable"

ALIVE = "alive"
DEAD = "dead"
DISPUTED = "disputed"
BLOCKED = "blocked"
UNREACHED = "unreachable"
FLAKY = "flaky"

# a channel served only in its own country answers, then refuses us
REFUSING_CODES = (401, 402, 403, 451)
GONE_CODES = (404, 410)

# ffprobe gets much longer than an HTTP probe: it has to open a connection, read
# enough of the stream to find a decodable frame, and do that over whatever the
# channel's own CDN feels like doing today, not just get a response header back
FFPROBE_TIMEOUT = 25


def read_channels(name, markers):
    """Return the `(channel, url, marker)` triples of the list called `name`.

    `markers` selects which rows to pull: `>` for the ones currently listed as
    working, `x` for the ones already flagged Invalid.
    """
    path = os.path.join(LISTS_DIR, name + ".md")
    channels = []
    with open(path, encoding="utf-8") as handle:
        for line in handle:
            match = ROW.match(line.strip())
            if match and match.group(2) in markers:
                channels.append((match.group(1).strip(), match.group(3), match.group(2)))
    return channels


def looks_like_a_playlist(head):
    """Return True if `head` is the start of an HLS or a DASH playlist."""
    text = head.lstrip()
    if text.startswith("#EXTM3U"):
        return True
    # DASH manifests are XML, and may carry a declaration, a comment or neither
    return "<MPD" in text[:2000]


# some radio stations serve the live audio itself at the listed URL rather than
# a playlist that points to one - that is a legitimate live source too, and a
# station is not "gone" just because it skipped the manifest step
STREAM_CONTENT_TYPES = ("audio/", "video/mp2t", "video/mpeg")


def looks_like_a_raw_stream(content_type):
    """Return True if `content_type` is a direct audio/video stream, not a manifest."""
    return content_type.lower().startswith(STREAM_CONTENT_TYPES)


# some geo-gated broadcasters (RAI's relinker is the known case) answer an
# out-of-territory request with a plain HTTP 200 and a real video file - not an
# error, a decoy: a short "this content is not available in your country" clip.
# A player never notices anything is wrong; our probe would call it alive. The
# redirect chain gives it away: it always lands on the same well-known asset,
# regardless of which channel was asked for.
GEOBLOCK_PLACEHOLDER_MARKERS = ("video_no_available.mp4",)


def is_geoblock_placeholder(final_url):
    """Return True if `final_url` is a known geo-block decoy, not a real stream."""
    return any(marker in final_url for marker in GEOBLOCK_PLACEHOLDER_MARKERS)


def classify_response(final_url, content_type, head):
    """Turn a completed HTTP response into an outcome: OK, REFUSED, or GONE."""
    if is_geoblock_placeholder(final_url):
        return REFUSED
    if looks_like_a_raw_stream(content_type):
        return OK
    return OK if looks_like_a_playlist(head) else GONE


def probe(url, timeout):
    """Open `url` once and report what the server did."""
    request = urllib.request.Request(url, headers={"User-Agent": USER_AGENT})
    # a stream whose certificate does not verify is still a working stream
    context = ssl.create_default_context()
    context.check_hostname = False
    context.verify_mode = ssl.CERT_NONE
    try:
        with urllib.request.urlopen(request, timeout=timeout, context=context) as response:
            final_url = response.geturl()
            content_type = response.headers.get("Content-Type", "")
            head = response.read(3000).decode("utf-8", "ignore")
    except urllib.error.HTTPError as error:
        if error.code in GONE_CODES:
            return GONE
        if error.code in REFUSING_CODES:
            return REFUSED
        return UNREACHABLE
    except (urllib.error.URLError, OSError, ValueError, http.client.HTTPException):
        # http.client.HTTPException covers a server that started a chunked
        # response and then hung up mid-chunk (IncompleteRead) and similar
        # low-level protocol violations - a broken connection, not a bad URL
        return UNREACHABLE
    return classify_response(final_url, content_type, head)


def ffprobe_finds_a_stream(url):
    """Ask ffprobe whether it can decode real audio/video from `url`.

    Returns True/False for a definite answer, or None if ffprobe itself could not
    be asked (missing binary, timed out, or errored) - None must never be treated
    as "no stream found", only as "no second opinion available this time".
    """
    try:
        result = subprocess.run(
            [
                "ffprobe", "-v", "error",
                "-user_agent", USER_AGENT,
                "-show_entries", "stream=codec_type",
                "-of", "csv=p=0",
                url,
            ],
            capture_output=True, text=True, timeout=FFPROBE_TIMEOUT, check=False,
        )
    except subprocess.TimeoutExpired:
        return None
    except OSError:
        return None
    if result.returncode != 0:
        return False
    return any(kind in result.stdout for kind in ("video", "audio"))


def classify(outcomes):
    """Turn the outcomes of the attempts on one channel into a single state."""
    if all(outcome == OK for outcome in outcomes):
        return ALIVE
    if any(outcome == OK for outcome in outcomes):
        return FLAKY
    if any(outcome == REFUSED for outcome in outcomes):
        return BLOCKED
    if all(outcome == GONE for outcome in outcomes):
        return DEAD
    return UNREACHED


def check(channel, settings):
    """Probe one channel `settings.attempts` times and return its state.

    If the channel looks dead and `settings.confirm_dead` is set, give it one more
    chance through ffprobe before reporting it as dead - see the module docstring
    for why this can only pull a verdict out of `dead`, never push one into it.
    """
    name, url, marker = channel
    outcomes = []
    for attempt in range(settings.attempts):
        outcomes.append(probe(url, settings.timeout))
        if attempt + 1 < settings.attempts:
            time.sleep(settings.pause)
    state = classify(outcomes)
    if state == DEAD and settings.confirm_dead:
        if ffprobe_finds_a_stream(url):
            state = DISPUTED
    return name, url, marker, state, outcomes


def check_all(names, markers, settings):
    """Probe every selected channel of every named list and return `{list_name: [results]}`.

    `markers` is passed straight through to `read_channels` - `{">"}` for the default
    working-channels-only run, `{"x"}` for an Invalid-only recovery scan, or both at
    once for --include-invalid. All channels of all lists share one pool of
    `settings.workers`, so a run across many lists is not slower per list than a run
    of one - a list with two channels does not pay the same wall-clock floor as a list
    with two hundred just because it was handed its own pool that then sits mostly idle.
    """
    channels_by_list = {
        name: [
            c for c in read_channels(name, markers)
            if not c[1].startswith("https://www.youtube.com")
        ]
        for name in names
    }

    def run(item):
        list_name, channel = item
        return list_name, check(channel, settings)

    jobs = [(name, channel) for name, channels in channels_by_list.items() for channel in channels]
    results_by_list = {name: [] for name in names}
    with ThreadPoolExecutor(max_workers=settings.workers) as pool:
        for list_name, result in pool.map(run, jobs):
            results_by_list[list_name].append(result)
    return results_by_list


def report(name, results, attempts):
    """Print the results of one list; return `(dead, recovered)` for this list.

    `dead` only counts `[>]` (working) channels - a dead `[x]` channel is the status
    quo, not a regression, so it never counts here. `recovered` counts `[x]` channels
    that answered `alive` or `flaky` this run: the opposite of the usual case, so it
    gets printed even though `report` otherwise skips `alive` as uninteresting.
    """
    states = {}
    for _, _, _, state, _ in results:
        states[state] = states.get(state, 0) + 1
    summary = ", ".join(f"{states[s]} {s}" for s in sorted(states))
    print(f"{name}: {len(results)} checked, {summary}")
    dead = 0
    recovered = 0
    for channel, url, marker, state, outcomes in results:
        detail = "/".join(outcomes) if state != FLAKY else f"{outcomes.count(OK)}/{attempts} ok"
        if marker == "x":
            if state in (ALIVE, FLAKY):
                recovered += 1
                print(f"  RECOVERED?   {channel} now looks {state} [{detail}] -> {url}")
            continue
        if state == DEAD:
            dead += 1
        if state != ALIVE:
            print(f"  {state:12} {channel} [{detail}] -> {url}")
    return dead, recovered


def as_records(list_name, results, checked_at, confirm_dead):
    """Turn one list's results into flat dicts, one per channel, for --json output.

    `confirm_dead` is recorded on every row so a later reader can tell a `dead`
    verdict that already survived an ffprobe second opinion from one that has not
    been asked yet - the two are not the same strength of evidence.
    """
    return [
        {
            "checked_at": checked_at,
            "list": list_name,
            "channel": channel,
            "url": url,
            "marker": marker,
            "state": state,
            "outcomes": outcomes,
            "confirm_dead": confirm_dead,
        }
        for channel, url, marker, state, outcomes in results
    ]


def parse_args():
    """Parse the command line into an `argparse.Namespace`."""
    parser = argparse.ArgumentParser(
        description=__doc__, formatter_class=argparse.RawDescriptionHelpFormatter,
    )
    parser.add_argument("lists", nargs="*", help="lists to check, without the .md suffix")
    parser.add_argument("--attempts", type=int, default=3, help="probes per channel")
    parser.add_argument("--timeout", type=int, default=12, help="seconds per probe")
    parser.add_argument("--pause", type=int, default=5, help="seconds between probes")
    parser.add_argument("--workers", type=int, default=8, help="channels probed at once")
    parser.add_argument(
        "--confirm-dead", action="store_true",
        help="give ffprobe a second opinion on channels that look dead (slower; needs ffmpeg)",
    )
    mode = parser.add_mutually_exclusive_group()
    mode.add_argument(
        "--invalid", action="store_true",
        help="check only the channels already flagged Invalid ([x]), to find ones that "
             "work again - never affects the exit code",
    )
    mode.add_argument(
        "--include-invalid", action="store_true",
        help="check the working channels and the ones flagged Invalid together, in one run",
    )
    parser.add_argument(
        "--json", metavar="PATH",
        help="also write every channel's result as one JSON record per line to PATH, for "
             "building a history across runs (state, outcomes, timestamp, list, channel, url)",
    )
    return parser.parse_args()


def write_json_records(handle, names, results_by_list, checked_at, confirm_dead):
    """Write every list's results to `handle` as one JSON record per channel per line."""
    for name in names:
        for record in as_records(name, results_by_list[name], checked_at, confirm_dead):
            handle.write(json.dumps(record, ensure_ascii=False) + "\n")


def main():
    """Check the lists named on the command line, or every list."""
    args = parse_args()

    if args.confirm_dead and shutil.which("ffprobe") is None:
        print(
            "--confirm-dead needs ffprobe (part of ffmpeg) on PATH; proceeding without it.",
            file=sys.stderr,
        )
        args.confirm_dead = False

    all_lists = (f[:-3] for f in os.listdir(LISTS_DIR) if f.endswith(".md"))
    names = args.lists or sorted(all_lists)
    checked_at = datetime.now(timezone.utc).strftime("%Y-%m-%dT%H:%M:%SZ")
    settings = ProbeSettings(
        args.attempts, args.timeout, args.pause, args.workers, args.confirm_dead,
    )
    markers = {"x"} if args.invalid else ({">", "x"} if args.include_invalid else {">"})

    results_by_list = check_all(names, markers, settings)

    dead_total = 0
    recovered_total = 0
    for name in names:
        dead, recovered = report(name, results_by_list[name], args.attempts)
        dead_total += dead
        recovered_total += recovered

    if recovered_total:
        print(
            f"\n{recovered_total} channel(s) flagged Invalid answered like a live stream "
            "this run - worth a human look before restoring them."
        )

    if args.json:
        with open(args.json, "w", encoding="utf-8") as handle:
            write_json_records(handle, names, results_by_list, checked_at, args.confirm_dead)

    return 1 if dead_total else 0


if __name__ == "__main__":
    sys.exit(main())